User`s guide

7990-A2-GB20-00 May 2002
B-1
B
Standards Compliance for SNMP Traps
SNMP Traps
This section describes the unit’s compliance with SNMP standards and any
special operational features for the SNMP traps supported. The unit supports the
following traps:
warmStart
on page B-2
authenticationFailure
on page B-2
linkUp and linkDown
on page B-3
Enterprise-Specific Traps
on page B-5
ifIndex Variable Binding
The ifIndex values shown in Table B-1, IfIndex Values, are supported for Hotwire
7995/7996 TDM SHDSL Endpoints.
In general, all traps have at a minimum a variable binding of ifIndex.
Table B-1. IfIndex Values
ifIndex Description Supported By
1 COM Port All models
2 DSL Interface All models
6 G.703 Interface Model 7996
10 EIA-530-A Interface Model 7995
14 EOC Management Link All models