User`s guide

A. Configuration Options
7990-A2-GB20-00 May 2002
A-17
Communication Port Options
For Communication Port Options, refer to Table A-7, Communication Port Options.
To access the Communication Port screen, follow this menu selection sequence:
Main Menu
→
Configuration
→
Current Configuration
→
Communication Port
When Port Use is set to Terminal, the following screen appears:
When Port Use is set to NetLink, the following screen appears:
main/config/com
Model: 799x
COMMUNICATION PORT OPTIONS
Port Use: Terminal
Port Type: Asynchronous
Data Rate: 9.6
Character Length: 8
Parity: None
Stop Bits: 1
Ignore Control Leads: Enable
Login Required: Disable
Port Access Level: Administrator
Inactivity Timeout: Enable
Disconnect Time (Minutes): 5
-------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu M
ainMenu Exit
main/config/com
Model: 799x
COMMUNICATION PORT OPTIONS
Port Use: NetLink
Port Type: Synchronous
Data Rate: 9.6
Character Length: 8
Parity: None
Stop Bits: 1
Ignore Control Leads: Enable
-------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu M
ainMenu Exit