User`s guide

4 Hotwire TDM SHDSL Endpoints 7990-A2-ZN10-30
Package Checklist
Verify that your package contains:
z Hotwire
®
TDM SHDSL Endpoint
z 24 VDC power transformer with separate power cable
– or –
6-conductor direct connection DC power cable
z 8-position modular-to-8-position modular network cable
z DB9-to-8-position modular terminal cable
For Model 7995, your package should also contain a:
z V.35 cable adapter
Notify your sales representative if anything is missing or damaged.
Installation Overview
Installation and configuration of the Hotwire 799x endpoint consists of:
z Connecting power to the unit.
z Connecting to the network.
z Connecting to a DTE.
z Connecting a system terminal.
z Providing initial unit identity information or changing existing identity information.
z Configuring your unit using the Configuration Edit menus.
Before you install the unit, read the Important Safety Instructions on page 29.
See the Hotwire TDM SHDSL Endpoints, Models 7995-A2-411, 7995-A2-421, 7995-A2-422,
7995-A2-700, 7996-A2-410, 7996-A2-420 and 7996-A2-700, User’s Guide for additional
information about:
z Configuration Options
z Messages and Troubleshooting
z Technical Specifications
z Connectors, Cables, and Pin Assignments