User`s guide

12 Hotwire TDM SHDSL Endpoints 7990-A2-ZN10-30
For complete details about the configuration options, see the Hotwire TDM SHDSL Endpoints,
Models 7995-A2-411, 7995-A2-421, 7995-A2-422, 7995-A2-700, 7996-A2-410, 7996-A2-420
and 7996-A2-700, User’s Guide.
Select . . . To Access the . . . To Configure the . . .
DSL Port DSL Interface Options (Table 1) DSL ports on the unit.
DSL Port
Threshold Traps
DSL Port Threshold Trap Options
(Table 2)
Threshold for DSL traps (for
the STU-C only).
SYNC Port
G.703
Synchronous Data Port Options – Model
7995 (Table 3)
G.703 Interface Options – Model 7996
(Table 4)
Synchronous DTE interface
(Model 7995)
G.703 interface
(Model 7996)
System Options System Options (Table 5) General system options of the
unit.
Communication
Port
Communication Port Options (Table 6) Unit’s COM port options.
Management and
Communication
z Telnet Session Options (Table 7)
z Communication Protocol Options
(Table 8)
z General SNMP Management Options
(Table 9)
z SNMP NMS Security Options
(Table 10)
z SNMP Traps Options (Table 11)
Management support of the
unit through SNMP and Telnet
(Telnet is for the STU-C only).
Table 1: DSL Interface Options (1 of 2)
Estimated Line Length
Possible Settings: Short, Medium, Long
Default Setting: Short
The estimated line length is the estimated distance from the local exchange to determine the
speeds that can be supported.