User`s guide

Table 8. Communication Protocol Options

Node IP Address

Possible Settings: 001.000.000.000 – 223.255.255.255, Clear

Default Setting: 000.000.000.000

For an STU-C, specifies the Node IP address.

Node Subnet Mask

Possible Settings: 000.000.000.000 – 255.255.255.255, Clear

Default Setting: 000.000.000.000

For an STU-C, specifies the Node Subnet Mask.

Default Network Destination

Possible Settings: None, COM, DSL

Default Setting: None

Specifies where the default management network is connected when Port Use is set

to NetLink for the COM port.. For example, if your default network is connected to the

COM port, select COM as the default management network destination.

Communication Port IP Address

Possible Settings: 001.000.000.000 – 223.255.255.255, Clear

Default Setting: Clear (000.000.000.000)

Specifies the Communication Port IP Address when Port Use is set to NetLink for the

COM port.

Communication Port Subnet Mask

Possible Settings: 001.000.000.000 – 255.255.255.255, Clear

Default Setting: Clear (000.000.000.000)

Specifies the Communication Port Subnet Mask when Port Use is set to NetLink for

the COM port.

Communication Port Link Protocol

Possible Settings: PPP, SLIP

Default Setting: PPP

Specifies the Communication Port link layer protocol when Port Use is set to NetLink

for the COM port.