User`s guide

ManualsBrandsZhone ManualsComputer equipmentHotwire 6390

8335-A2-GZ40-60 March 2005 1

Hotwire

ATM Line Cards

Models 8335, 8355, 8365, 8375, and 8385

Installation Instructions

Document Number 8335-A2-GZ40-60

March 2005

Contents

Software and Firmware License Agreement ................................................. 2

Hotwire ATM Line Cards ............................................................................... 3

Product Documentation Online ..................................................................... 3

Installation Overview ..................................................................................... 4

Planning the Installation ................................................................................ 4

Cables You Need .......................................................................................... 5

Installing DSL Cards ..................................................................................... 5

Connecting to the ATM Network ................................................................... 6

Connecting to an MDF or ADSL POTS Splitter ............................................ 7

Front Panel LEDs .......................................................................................... 8

Logging In to the MCC Card ......................................................................... 9

Entering Card Information ............................................................................ 9

Configuring the DSL Ports ............................................................................ 9

Configuring the ATM Parameters .................................................................. 9

Configuring ATM Cross Connection .............................................................. 9

Asynchronous Terminal Interface Menu ....................................................... 10

Warranty, Sales, Service, and Training Information ...................................... 11

Document Feedback ..................................................................................... 11

Trademarks ................................................................................................... 11

Summary of content (12 pages)

PAGE 1
Hotwire® ATM Line Cards Models 8335, 8355, 8365, 8375, and 8385 Installation Instructions Document Number 8335-A2-GZ40-60 March 2005 Contents Software and Firmware License Agreement ................................................. 2 Hotwire ATM Line Cards ............................................................................... 3 Product Documentation Online ..................................................................... 3 Installation Overview ...........................................
PAGE 2
Software and Firmware License Agreement ONCE YOU HAVE READ THIS LICENSE AGREEMENT AND AGREE TO ITS TERMS, YOU MAY USE THE SOFTWARE AND/OR FIRMWARE INCORPORATED INTO THE PARADYNE PRODUCT. BY USING THE PARADYNE PRODUCT YOU SHOW YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE AGREEMENT.
PAGE 3
7. 8. 9. 10. savings, loss of business information or business interruption or other pecuniary loss arising out of the use or inability to use the Software, whether based on contract, tort, warranty or other legal or equitable grounds, even if Paradyne has been advised of the possibility of such damages, or for any claim by any third party.
PAGE 4
Document Number Document Title 6390-A2-GN10 Hotwire ReachDSL Modem, Model 6390 with Inline Phone Filter, Installation Instructions 8000-A2-GB22 Hotwire Management Communications Controller (MCC) Card, IP Conservative, User’s Guide 8021-A2-GB20 Hotwire Shelf Concentration Module (SCM) Card User’s Guide 8021-A2-GZ40 Hotwire Shelf Concentration Module (SCM) Card Installation Instructions 8620-A2-GN20 8620 Broadband Loop Carrier Installation Guide 8820-A2-GN20 8820 Broadband Loop Carrier Installation
PAGE 5
Cables You Need The following standard cables are used with this product: For the DSL network connection: Plug-ended Telco 50-pin cable for connection from the chassis rear connector to the MDF or other demarcation point. Refer to the 8620 or 8820 BLC Installation Guide and, if applicable, the documentation that came with your POTS splitter for more information. For the ATM Uplink: Refer to the Hotwire Shelf Concentration Module (SCM) Card User’s Guide for cable specification information.
PAGE 6
3. Holding the ATM Line Card vertically with component side facing right, insert it into the top and bottom card guides.
PAGE 7
Connecting to an MDF or ADSL POTS Splitter You can connect the ATM Line Card to an MDF or other demarcation point. Do not connect the Model 8335 or 8385 to a POTS splitter. Refer to the 8620 or 8820 BLC Installation Guide for more information. Refer to Connector Pin Assignments in the Hotwire ATM Line Cards, Models 8335, 8355, 8365, 8375, and 8385, User’s Guide for pinouts of the BLC ports. Procedure To connect the chassis containing the unit to an MDF: 1.
PAGE 8
Front Panel LEDs The following table describes the meaning and states of the LEDs on the front panel. R Green, Fast Blinking Firmware download needed. Amber, On Alarm is present on the card. ATM interface is not being detected. Off Normal operation, no alarms. Amber, On Test in progress. Off Normal operation, no tests. Amber, Fast Blinking Self-test is in progress. Off Inactive. Green, Fast Blinking Cells are being transmitted. Off Inactive, link down.
PAGE 9
Logging In to the MCC Card You can log in to the management card using either a local VT100- compatible terminal or a remote Telnet connection. After you enter your user ID and password, the system displays the Main Menu. See the Hotwire Management Communications Controller (MCC) Card, IP Conservative, User’s Guide for information about selecting the unit from the card selection screen.
PAGE 10
Asynchronous Terminal Interface Menu The following diagram shows the menu paths to the functions available through the asynchronous terminal interface.
PAGE 11
Warranty, Sales, Service, and Training Information Contact your local sales representative, service representative, or distributor directly for any help needed. For additional information concerning warranty, sales, service, repair, installation, documentation, training, distributor locations, or Paradyne worldwide office locations, use one of the following methods: Internet: Visit the Paradyne World Wide Web site at www.paradyne.com. (Be sure to register your warranty at www.paradyne.com/warranty.
PAGE 12
*8335-A2-GZ40-60* *8335-A2-GZ40-60* 12 March 2005 8335-A2-GZ40-60