System information

21
6. If you changed the IP Address, access the Bridge/Router using the new address.
7. Select Local > Commands in the menu frame. Click on Save All Changes. If the
configuration is not saved, it is lost upon the next power reset.
If the Bridge/Router’s DHCP server function is disabled, you must configure the IP
address, subnet mask and DNS settings of every computer on your network. Do not
assign the same IP address to more than one computer.
Saving Changes, Restarting, and Restoring Factory
Defaults
Most changes made on the web interface screens are temporary. To permanently save
the Bridge/Router’s configuration, select Commands from the Local > Options menu.
Click on Save All Changes.
From this screen you can also restart the Bridge/Router, collect system information
(used for debugging), change the security status, and restore the Bridge/Router to its
factory defaults.
Configuring the System Log
You can display the system log by selecting System Log from the Local > Options menu.
Select Errors Only, Normal, or Tech Support, respectively, for minimized, standard, and
highly detailed views of the log.