System information

14
Configuring PVCs and Connections
The minimum configuration requires the definition of at least one Permanent Virtual
Circuit (PVC) and a Connection. The factory default configuration includes one PVC,
named BridgeVC, and one connection, named Bridge.
Defining a PVC
The PVC is an ATM Virtual Circuit used to communicate over the DSL link. The
Bridge/Router supports up to seven PVCs.
To create a PVC:
1. Select DSL > ATM PVC > New. The New PVC screen appears.
2. Enter a PVC Name and click on Next.
3. Enter the VPI, VCI and choose a QoS option:
— UBR (Unspecified Bit Rate)
— CBR (Constant Bit Rate)
— VBR (Variable Bit Rate)
4. For CBR, enter the Peak Cell Rate (PCR). For VBR, enter the PCR and Sustainable
Cell Rate (SCR). Permitted values for both PCR and SCR are 0–10,000,000.
5. Click on Apply.
Defining a Connection
The Connection defines a communication method for a PVC.
To create a connection:
1. Select Connection > New. The New Connection screen appears.