System information

Configuring DSL Modulation

To change the DSL modulation:

1. Select Modulation from the DSL > Line menu.

2. Select a modulation from the drop-down list:

— T1413 – ANSI T1.413-1998

— GDMT – G.dmt (G.992.1)

— GLITE – G.lite (G.992.2)

— MMODE – Multi-Mode (the modulation is automatically detected)

— NONE – No modulation (the link is disabled)

3. Click on Apply.

NOTE: In configurations with multiple bridged PVCs, communication with the

endpoint is temporarily lost when you change the DSL modulation.

DSL Status

Select Status from the DSL > Line menu to display DSL, ATM, and ReachDSL statistics.

DSL Test

Select Test from the DSL > Line menu to send OAM (ATM) pings to a selected PVC.