System information

11
Accessing the Web Interface
Procedure
To configure the router using the web interface:
1. Start Internet Explorer 6.0 or above on a PC that is connected to the router directly
or through your hub.
2. Type the following into Internet Explorer’s address line:
http://192.168.1.1:8080
3. Press Enter. The Login screen appears.
4. Type the Name and Password exactly as they were supplied to you by your ISP.
Both Name and Password are Admin if your ISP uses the factory default.
5. Click on OK. The web interface main screen appears.
The main screen consists of four sections, called frames:
— A header frame at the top of the screen
— A menu frame on the left side of the screen
— A content area in the middle of the screen
— A status area at the bottom of the screen