Specifications

6390-A2-GK40-00 September 2002

Procedure

To create a PVC from the GranDSLAM 4200 port to the Hotwire 6390 ReachDSL

modem:

1. Log into the GranDSLAM 4200 unit using the

ACT-USER

command.

For example, type:

ACT-USER:TAMPA:SUPERUSER:100::********

2. Create a VCL to the upstream network (on the NT) with VPI=1 and VCI=33

using the

ENT-VCL

command.

For example, type:

ENT-VCL:TAMPA:NTVCL-1-33:100::1,1;

3. Create a VCL to the Hotwire 6390 ReachDSL Modem attached to Port 1 (on

the LT) with VPI=0 and VCI=33 using the

ENT-VCL

command.

For example, type:

ENT-VCL:TAMPA:LTVCL-1-1-1-1-0-33:100::1,1;

4. Create a cross connection between the upstream ATM network (NT) and

Port 1 (LT) using the

ENT-CRS-VC

command.

For example, type:

ENT-CRS-VC:TAMPA:NTVCL-1-33,LTVCL-1-1-1-1-0-33:100::::IS;

5. Define a management PVC path across the ATM network to reach the

GranDSLAM 4200 1/33 uplink management PVC using 1483 routed

encapsulation.

6. Ping the Hotwire 6390 ReachDSL Modem Management IP address assigned

by the DHCP server (DHCP mode) or manually (Static mode) using the

ping

command (see Table 1, Hotwire ReachDSL 6390 Modem Commands).

Downloading Software to the ReachDSL Modem

Procedure

To download new software to the Hotwire 6390 ReachDSL Modem flash memory:

1. Telnet to the 6390 modem.

2. Use the

upgrade

command to begin the software download (see Table 1,

Hotwire ReachDSL 6390 Modem Commands). The modem is automatically

reset after a successful download.