Specifications

10
September 2002 6390-A2-GK40-00
Hotwire 6390 ReachDSL Modem Commands
The Hotwire 6390 ReachDSL Modem provides the commands listed in Table 1,
Hotwire ReachDSL 6390 Modem Commands. Use a PC connected to the
Ethernet jack on the rear panel of the modem or Telnet into the modem to enter
these commands.
Table 1. Hotwire ReachDSL 6390 Modem Commands (1 of 2)
Command Syntax Argument Function Description
help {all<command>}
No argument
all
command
Displays help information.
Displays a list of all valid commands
Displays a list of all valid commands and
their syntax
Displays syntax for command
info None Displays device information.
Model Number
Serial Number
Firmware Revision
Hardware Revision
DSP Revision
logoff None Terminates the Telnet session.
mgmtpvc {dhcp<IP address>
<gateway>}
No argument
dhcp or ip address
– dhcp
Example: mgmtpvc dhcp
– IP address gateway
Example: mgmtpvc
135.26.95.1 135.26.95.6
Configures or displays the management PVC.
Current configuration
Configures the management PVC:
– The management PVC acquires its
address using DHCP
– The management PVC is configured for
the specified IP address and gateway
password [<login>] <password>
login
Example: password user user
password
Example: password secret
Configures the modem’s password(s).
Only available to “admin” users. Can either
be “admin” (default) or “user”
password
ping
<IP address>
Example: ping 135.26.12.254
Only available to “admin” users. Initiates a ping
to the specified IP address and displays
results.
An IP address must be specified
reset None Resets the unit.