Installation guide

8820-A2-GN20-80 November 2004 5-1
5
Cabling: Test Access SIM
Test Access SIM
This chapter describes cabling for the Test Access System Interface Module (SIM),
feature number 8820-S1-905, which has 12 8-pin ports:
 Clock A and Clock B – See Connecting Clock Sources to Clock A and Clock B
on page 5-2
 MCP Serial – See Connecting an MCP Card to a Terminal or PC on page 5-2
 SCP Serial – See Connecting an SCP Card to a Terminal or PC on page 5-4
 Alarm In – See Connecting the Alarm In Port to an External Alarm on page 5-5
 Alarm Out – See Connecting Alarm Out to the CO Alarm System on page 5-6
 MCP LAN – See Connecting an MCP to an SNMP Management System on
page 5-6
 SCP LAN – See Connecting an SCP Card to an SNMP Management System
on page 5-7
 Hub-1 LAN and Hub-2 LAN – See Connecting the Hub-1 and Hub-2 LAN
Ports on page 5-7
 TAP In and TAP Out – See Using the Test Access Path (TAP) Ports on
page 5-8
For cabling of the standard 24-port SIM, see Chapter 4, Cabling: Standard SIM.