Installation guide

4. Cabling: Standard SIM
8820-A2-GN20-80 November 2004
4-5
Connecting an SCP Card to an SNMP Management System
Procedure
To connect an SCP card to an SNMP management system:
1. Plug an 8-pin modular cable into LAN SLOT A or B of the SIM, according to
which slot the SCP card is installed.
2. For a chassis with a redundant SCP card, a cable is required in both the LAN
SLOT A and LAN SLOT B jacks of the SIM.
3. Dress the cable or cables to the right and through the cable retainer.
4. Plug the other end of the cable or cables into the 10/100BaseT hub connected
to the SNMP management system network.
Connecting an MCP to an SNMP Management System
Procedure
To connect an MCP card to an SNMP management system, or for Telnet access to
the MCP card:
1. Plug an 8-pin modular cable into LAN Slot 9 of the SIM, which corresponds to
the MCP card in Slot 9 of the chassis.
2. Dress the cable to the right and through the cable retainer.
3. Plug the other end of the cable into the 10/100BaseT hub connected to the
SNMP management system network.
SERIAL
SMCM
CLOCK
A
ALARM
2
4
6
8
10
12
14
16
18
1
35
7
9
11
13 15
17
LAN SLOT
B
CLOCK
B
A
SERIAL
MCP
AC
ALARM
LAN Slot B
03-17434
LAN Slot A
SERIAL
SCM
CLOCK
A
ALARM
2
4
6
8
10
12
14
16
18
1
35
7
9
11
13 15
17
LAN SLOT
B
CLOCK
B
A
SERIAL
MCP
AC
ALARM
Slot 9
00-16560-01