Installation guide

8820-A2-GN20-80 November 2004 v
About This Guide
Document Purpose and Intended Audience
This document applies to the Model 8820-A2-5xx Broadband
Access Concentrator (BAC).
This document is written for administrators and technicians who install devices at
the central office (CO). This document should be used in conjunction with the
appropriate line card documentation.
Document Summary
Section Description
Chapter 1, Introduction Provides general information about what types of cards can
be used in the 8820 BAC, and describes features of the
BAC.
Chapter 2, Installation Describes what is supplied with the 8820 BAC, how to
install it, and how to install cards into the chassis.
Chapter 3, Cabling: Line
Card Tip and Ring
Describes how to install the cables that provide tip and ring
connections for the line cards.
Chapter 4, Cabling:
Standard SIM
Describes how to install the cables used with the standard
24-port SIM.
Chapter 5, Cabling: Test
Access SIM
Describes how to install the cables used with the 12-port
Test Access SIM.
Chapter 6, Troubleshooting Lists suggested solutions to possible BAC problems and
describes the front panel LEDs.
Appendix A, Pinouts Provides pinouts for the BAC connectors as well as for
connectors on cards that can be used in the BAC.
Appendix B, Technical
Specifications
Lists the physical characteristics of the BAC.
Index Lists key terms, acronyms, concepts, and sections in
alphabetical order.