Installation guide

8620-A2-GN20-50 June 2004 iii
About This Guide
Document Purpose and Intended Audience
This guide is written for administrators and technicians who install devices at the
central office (CO) or at a Network Service Provider (NSP) location adjacent to the
CO. It should be used in conjunction with the appropriate management card and
line card documentation.
To install the customer premises portion of the 8620 Broadband Access
Concentrator (BAC), refer to the appropriate Remote Termination Unit (RTU)
customer premises installation instructions and POTS splitter customer premises
installation instructions.
Document Summary
Section Description
Chapter 1, Introduction Provides general information about what types of cards
can be used in the 8620 BAC, and describe features of
the BAC.
Chapter 2, Installation Describes what is supplied with the 8620 BAC, how to
install it, and how to install cards into the chassis.
Chapter 3, Cabling Describes how to install various cables used by the 8620
BAC and its cards.
Chapter 4, Troubleshooting Lists suggested solutions to possible problems and
describes the LEDs.
Appendix A, Pinouts Provides pinouts for the BAC connectors as well as for
connectors on cards that can be used in the BAC.
Appendix B, Technical
Specifications
Lists Technical Specifications for the 8620 BAC.
Glossary Defines terms and acronyms used in this document.
Index Lists key terms, concepts, and sections in alphabetical
order.