Specifications
496-14952
97-15303c
Ethernet
Line
POWER
ETHERNET
DSL
Hotwire RTU
Ferrite
Choke
10
3. Place the large ferrite choke on
the Ethernet cable as closely as
possible to the RTU. Pass the
Ethernet cable through the
ferrite choke twice, creating
a loop as shown.
4. Close the two halves
around the cable and
snap the ferrite choke
shut. Press down on the
plastic latch to secure
the ferrite choke in place
around the cable.
5. Insert the power cord’s round end into the jack labeled POWER. Attach the ferrite
choke on the power cord as closely as possible to the RTU. Pass the power cable
through the ferrite choke twice, creating a loop as shown.
97-15796
POWER
ETHERNET
DSL
Hotwire RTU
Power
Jack
or
Ferrite
Choke
6. Close the two halves around the cable and snap the ferrite choke shut. Press down
on the plastic latch to secure the ferrite choke in place around the cable.
7. Plug the transformer into an AC outlet.