User`s guide

SNMP Configuration Worksheets
C-6
8000-A2-GB21-10June 1997
SNMP Security
Prompt Your Configuration Setting
1. Determine whether you want to enable
or disable IP address security:
– Enter enable at the
Enable/Disable: prompt to
enable (turn on) security.
– Enter disable at the
Enable/Disable: prompt to
disable (turn off) security.
IP Address Security =
2. At the (nnn.nnn.nnn.nnn) prompt,
enter the IP address of an SNMP NMS
manager(s).
For each manager, specify the access
permission: NA (No Access), RO
(Read Only), or RW (Read Write).
NOTE: You can enter up to five
SNMP NMS managers.
 IP Address =
Access =
 IP Address =
Access =
 IP Address =
Access =
 IP Address =
Access =
 IP Address =
Access =