User`s guide

SNMP Configuration Worksheets
C-5
8000-A2-GB21-10
June 1997
Preventing Unauthorized Access
Use the SNMP Security screen to enable SNMP security (i.e., prevent
unauthorized managers from browsing the HotWire DSLAM network).
 If address security is to be activated, it should be activated on the MCC and
all DSL cards.
 If the NSP wants to allow an ISP or customer access to a limited set of DSL
cards, that NMS’s IP address should only be entered on the MCC and those
DSL cards in the limited set.
Access the . . .
By . . .
SNMP Security screen
Selecting Configuration → SNMP → Security
(A-F-A) from the HotWire – MCC menu if
configuring the MCC card.
Selecting
Configuration → SNMP → Security
(A-F-A) from the HotWire – DSL menu if
configuring a DSL card.
NOTE:
The following screen is the SNMP Security screen from the HotWire – MCC
menu. The SNMP Security screen from the HotWire – DSL menu is not
shown. However, it displays the same fields and prompts.