User`s guide

SNMP Configuration Worksheets
C-2
8000-A2-GB21-10June 1997
SNMP Agent Configuration Worksheets
The following sections provide worksheets for configuring the SNMP agent. Use
these worksheets when preparing SNMP configuration on both the MCC and DSL
cards.
Defining a Community and Enabling Traps
On the SNMP Communities/Traps screen, define a community by specifying the
SNMP NMS manager who will receive traps and who has permission to browse.
Up to three managers can be assigned for each community. Also, on this screen,
you can enable or disable the generation of traps.
Access the . . .
By . . .
SNMP Communities/Traps screen Selecting
Configuration → SNMP → Communities/Traps
(A-F-D) from the HotWire – MCC menu if
configuring the MCC card.
Selecting
Configuration → SNMP → Communities/Traps
(A-F-C) from the HotWire – DSL menu if
configuring a DSL card.
NOTE:
The following screen is the SNMP Communities/Traps screen from the
HotWire – MCC menu. The SNMP Communities/Traps screen from the
HotWire – DSL menu is not shown. However, it displays the same fields and
prompts.