User`s guide

IP Filtering Configuration Worksheets
B-7
8000-A2-GB21-10
June 1997
IP Network Screen A-C-B
Prompt Your Configuration Setting
1. Enter the interface name at the Input
Interface Name: prompt.
IP Interface = s1b
2. Enter one of the following:
– For the Input Filter field, enter the
desired filter name at the Filter
Name (blank to disable
filtering): prompt.
Use an input filter to prevent packets
entering the DSL card through a
specified interface from being
forwarded.
– For the Output Filter field, enter the
desired filter name at the Filter
Name (blank to disable
filtering): prompt.
Use an output filter to prevent
packets from going out of the DSL
card through a specified interface.
Input Filter =
or
Output Filter =
NOTE: You can specify an input filter
for one interface and an output
filter for another interface. Do
not, however, specify an input
filter and an output filter for the
same interface.
Remember, if you are using the
default filter names as input
filters, the filters are already
bound to their corresponding
interface.