User`s guide

IP Filtering Configuration Worksheets
B-4
8000-A2-GB21-10June 1997
IP Filter Configuration A-E-C
Prompt Your Configuration Setting
1. At the Action:
(Add/Delete/Edit): prompt, type
A to add a rule.
2. Enter the name of the filter for which
you want to define rules at the Enter
Filter Name: prompt.
The DSLAM provides the following
filter names that are already bound to
the appropriate interface:
– For the e1a interface, enter lan1.
– For the DSL port #1 interface, enter
dsl1.
– For the DSL port #2 interface, enter
dsl2.
– For the DSL port #3 interface, enter
dsl3.
– For the DSL port #4 interface, enter
dsl4 .
NOTE: You can change these
default filter names.
However, if you change the
filter names on this screen,
you must remember to
change the name specified in
the Input Filter field on
the IP Network screen. If you
do not change the default
names, you do not need to
go to the IP Network screen,
because the default filter
names are already bound to
the appropriate interface.
Filter Name =