User`s guide

IP Filtering Configuration Worksheets
B-2
8000-A2-GB21-10June 1997
NOTE:
For each DSL card, the HotWire DSLAM provides the following default
filter names:
— lan1 – bound to e1a
— dsl1 – bound to DSL port #1
— dsl2 – bound to DSL port #2
— dsl3 – bound to DSL port #3
— dsl4 – bound to DSL port #4
For the MCC card, lan1 (bound to e1a) is the only default filter.
When using these filter names as input filters, by default, these filters are
already bound to their corresponding interfaces. To use these filter
names as output filters, you must manually bind them on the IP Network
screen.
Keep in mind that up to 33 rules can be configured for each filter. By default, if
you do not specify rules, the system will forward packets.