User`s guide

Network Configuration Worksheets
A-20
8000-A2-GB21-10June 1997
Static Routes Screen A-E-A
Prompt Your Configuration Setting
5. Enter 1 at the Input Number:
prompt to specify the preference for
this route.
1 has the highest preference. The
greater the number the lower the
preference.
Pref= 1
6. Enter dst or src at the Source
(Src)/ Destination(dst):
prompt.
S/D=
7. Enter no or press RETURN at the
yes/no: prompt to keep the NO value
under the PA (proxy ARP) column.
PA= no
8. When the system highlights Save
Changes?, enter yes at the yes/no:
prompt.
Reset the DSL Card
After configuring the DSL card for the customer domain, reset the card. On the
Card Reset screen (
Configuration → Card Status → Card Reset) , reset the DSL
card by entering yes at the yes/no: prompt.