User`s guide

Network Configuration Worksheets
A-18
8000-A2-GB21-10June 1997
Static Routes Screen A-E-A
Prompt Your Configuration Setting
1. Enter 0 or press Return at the Item
Number (0 to add new
record): prompt to add a new
record.
2. Enter the IP address of the end-user
system at the Destination (or
space to delete route):
prompt.
Host/Net =
3. Do one of the following at the
Subnet:(nnn.nnn.nnn.nnn):
prompt:
– Enter 255.255.255.255 if you want
to create a host route to the IP
address specified in Step 2, or
– Enter the appropriate subnet mask if
you want to enter a network or
subnet route.
Subnet Mask =
4. Enter the IP address of the associated
HotWire 5446 RTU management IP
address at the Next Hop IP
Address (nnn.nnn.nnn.nnn):
prompt.
Next Hop =
5. Enter dst or src at the Source
(Src)/ Destination(dst):
prompt.
S/D=
6. Enter yes at the yes/no: prompt. PA= yes
7. When the system highlights Save
Changes?, enter yes at the yes/no:
prompt.
Create a Default Route or Source Route
On the Static Routes screen, create a default route or source route for each DSL
card (upstream direction). If creating a default route, fill out one worksheet. If
creating source routing, complete one worksheet per domain (up to 16 domains;
four domains per port).
Access the . . .
By . . .
Static Routes screen
Selecting Configuration → IP Router → Static
Routes from the HotWire – DSL menu.