User`s guide

Network Configuration Worksheets
A-17
8000-A2-GB21-10
June 1997
Create Static Routes to End-User Systems
On the Static Routes screen, create a static route to end-user systems on each
DSL card. For host addressing, fill out one worksheet for each end-user system.
For structured subnet addressing, complete up to 16 worksheets (up to four
worksheets for each of the DSL ports corresponding to the four domains
supported on each port).
NOTE:
Each time you create a static route for an end-user system behind an RTU,
you should also create a corresponding source-based input filter rule. See
Chapter 7,
IP Filtering , and Appendix B, IP Filtering Configuration
Worksheets
, for introductory information about the filtering screens. See the
HotWire Digital Subscriber Line Access Multiplexer (DSLAM) User’s Guide
for detailed information.
Access the . . .
By . . .
Static Routes screen
Selecting Configuration → IP Router → Static
Routes from the HotWire – DSL menu.