User`s guide

Network Configuration Worksheets
A-14
8000-A2-GB21-10June 1997
Customer Domain Configuration Worksheets
For the customer domain, select the DSL card you want to configure, and then
configure the following for each of the DSL cards in the HotWire DSLAM:
Perform this task . . .
On this screen . . . To access screen . . .
1. Assign IP addresses to
the DSL card LAN
interface (e1a).
(HotWire – DSL)
IP Network screen
From the HotWire – DSL
menu, select:
Configuration → Interfaces
→ IP Network
2. Create static routes to
end-system users on
each DSL card.
(HotWire – DSL)
Static Routes screen
From the HotWire – DSL
menu, select:
Configuration → IP
Router
→ Static Routes
3. Create default route. (HotWire – DSL)
Static Routes screen
From the HotWire – DSL
menu, select:
Configuration → IP
Router
→ Static Routes
4. Reset the DSL card. (HotWire – DSL)
Card Reset screen
From the HotWire – DSL
menu, select:
Configuration → Card
Status
→ Card Reset
Use the worksheets in the following sections to record your network configuration
settings. Photocopy the worksheets as needed.