User`s guide

Network Configuration Worksheets
A-11
8000-A2-GB21-10
June 1997
IP Network Screen A-C-B
Prompt Your Configuration Setting
3. Enter route type HOST at the Route
to peer (host/net): prompt.
Route to Peer= HOST
For DSL port 3 (s1e):
1. Enter the interface name at the Input
Interface Name: prompt.
IP Interface = s1e
2. Enter the peer IP address at the
(nnn.nnn.nnn.nnn)or
address-pool: prompt.
Peer IP Address =
3. Enter route type HOST at the Route
to peer (host/net): prompt.
Route to Peer= HOST
For DSL port 4 (s1f):
1. Enter the interface name at the Input
Interface Name: prompt.
IP Interface = s1f
2. Enter the peer IP address at the
(nnn.nnn.nnn.nnn)or
address-pool: prompt.
Peer IP Address =
3. Enter route type HOST at the Route
to peer (host/net): prompt.
Route to Peer= HOST
Create a Static Route to the NMS
On the Static Routes screen, create a static route to the NMS (on each DSL
card).
Access the . . .
By . . .
Static Routes screen
Selecting Configuration → IP Router → Static
Routes from the HotWire – DSL menu.