User`s guide

Network Configuration Worksheets
A-10
8000-A2-GB21-10June 1997
Configure the HotWire 5446 RTU Management Domain IP Addresses
On the IP Network screen, configure the HotWire 5446 RTU IP addresses on
each DSL card, which are the RTU’s management domain IP addresses.
Access the . . .
By . . .
IP Network screen
Selecting Configuration → Interfaces → IP Network
from the HotWire – DSL menu.
IP Network Screen A-C-B
Prompt Your Configuration Setting
For DSL port 1 (s1c):
1. Enter the interface name at the Input
Interface Name: prompt.
IP Interface = s1c
2. Enter the peer IP address at the
(nnn.nnn.nnn.nnn)or
address-pool: prompt.
Peer IP Address =
3. Enter route type HOST at the Route
to peer (host/net): prompt.
Route to Peer= HOST
For DSL port 2 (s1d):
1. Enter the interface name at the Input
Interface Name: prompt.
IP Interface = s1d
2. Enter the peer IP address at the
(nnn.nnn.nnn.nnn)or
address-pool: prompt.
Peer IP Address =