User`s guide

Network Configuration Worksheets
A-9
8000-A2-GB21-10
June 1997
Reset the MCC Card
After configuring the MCC card for the management domain, reset the card to
install the configuration setting. On the Card Reset screen (
Configuration → Card
Status
→ Card Reset) , reset the MCC card by entering yes at the yes/no:
prompt.
NOTE:
After resetting the MCC card, select a DSL card to continue with the
management domain configuration. To select a DSL card:
— Press Return to display the top-level menu (HotWire Chassis menu).
— Select Card Selection from the HotWire Chassis menu.
The Card Selection screen appears.
— Verify that the DSL card you want to configure appears on the Card
Status screen.
— At the Goto Card (MCC or DSLnn): prompt, enter DSL and the
number of the slot. Then, press Return. For example, if you want to
configure the DSL card in slot 13, enter DSL13.
The HotWire – DSL menu appears.