User`s guide

Network Configuration Worksheets
A-4
8000-A2-GB21-10June 1997
Assign an IP Address to the Backplane (s1b)
On the IP Network screen, assign an IP address to the backplane (s1b).
Access the . . .
By . . .
IP Network screen
Selecting Configuration → Interfaces → IP Network
from the HotWire – MCC menu.
IP Network Screen A-C-B
Prompt Your Configuration Setting
1. Enter the interface name at the Input
Interface Name: prompt.
IP Interface = s1b
2. Enter the base IP address at the
(nnn.nnn.nnn.nnn): prompt.
Base IP Addr =
3. Enter the base subnet mask at the
(nnn.nnn.nnn.nnn): prompt.
Base Subnet Mask =
4. Enter the peer IP address at the
(nnn.nnn.nnn.nnn)or
address-pool: prompt.
Peer IP Address =
5. Enter route type NET (for network) at
the Route to peer (host/net):
prompt.
Route to Peer= NET