User`s guide

Network Configuration Worksheets
A-3
8000-A2-GB21-10
June 1997
Who Am I Screen
Prompt Your Configuration Setting
1. Enter the IP address to the MCC card
(e1a) at the (nnn.nnn.nnn.nnn):
prompt.
IP Address =
2. Enter the subnet mask at the
(nnn.nnn.nnn.nnn): prompt.
Note that the system automatically
calculates the subnet mask. Press
Return to accept the default value or
enter a new value at the prompt.
Subnet Mask =
3. Reboot the system by typing yes at the
yes/no: prompt, when the system
highlights OK to restart?.
NOTE:
To continue configuring the management domain, you must select the MCC
card.
After the system reboots, press Return to display the HotWire Chassis menu.
— From the HotWire Chassis menu, select Card Selection.
The Card Selection screen appears.
— At the Goto Card (MCC or DSLnn): prompt, enter MCC and press
Return.
The HotWire – MCC menu appears.