Specifications

97-15437-01
Lever
Closure
Screw
4
Preparing the POTS Splitter
" Procedure
1. Unscrew the closure screw and open
the housing by pressing on the lever
on the right above the closure screw.
2. Remove the rubber grommet at the
base of the POTS splitter.
3. Make a small diagonal cut in the
rubber grommet to feed the wiring
through.
4. Replace the rubber
grommet at the
base of the POTS splitter.
P1 P2 P3 P4
97-15256
Rubber
Grommet
Base of
POTS Splitter