User`s guide

Monitoring Devices
5-14
7800-A2-GB26-80
May 1999
" Procedure
To obtain status on the MCC, DSL, or NAM card:
1. Open a Device Display that contains the MCC, DSL, or NAM card.
2. Press the right mouse button over the MCC, DSL, or NAM card. A pop-up
menu appears.
You can select this option from both the Diagnose menu and toolbar also.
3. Select Status from the pop-up menu. A Status dialog appears.
The following example shows Health and Status for DSL card.
Using the Lamp Test
A Lamp Test causes the front panel lights on a device to blink on and off. This
enables a service person to easily locate the device in a rack full of equipment.
This option is available for all devices that support Lamp Test operations under
SNMP control.
The following procedures describe how to enable and disable a Lamp Test.
" Procedure
To enable a Lamp Test:
1. Open a Device Display.
2. Click on the Diagnose menu and select Lamp Test Start.
" Procedure
To disable a Lamp Test:
1. Open a Device Display.
2. Click on the Diagnose menu and select Lamp Test Stop.
Some devices have a timer that terminates a Lamp Test automatically. For more
information, see the Device User Manual.