User`s guide

Monitoring Devices
5-9
7800-A2-GB26-80
May 1999
" Procedure
To obtain the identity of a device from within OpenView:
1. Display an OpenView submap.
2. Click on the device you want to identify.
3. Click on the Fault menu and select DCE Manager. The DCE Manager
submenu opens.
4. Select Identity from the DCE Manager submenu. A Device Identity dialog
appears.
The information displayed in the dialog varies depending on the device type
you selected. The following examples shows the identity of a FrameSaver
SLV 9124 device.
" Procedure
To obtain identity of a device from within a Device Display:
1. Open a Device Display.
2. Click on the Diagnose menu and select Identity. The Device Identity dialog for
the selected device appears.
As in the previous example, the information that is displayed is specific to the
device you selected.