User`s guide

v
7800-A2-GB26-80
May 1999
About This Guide
Document Purpose
The OpenLanet Data Communications Equipment (DCE) Manager
Release 4.3 is a collection of components that run as part of the Hewlett-Packard
(HP) OpenView (herein referred to as OpenView) or NetView network
management system. This guide describes how to install and use the OpenLane
DCE Manager to administer, configure, monitor, and test the following devices:
H ACCULINKR 3100 and 3300 Series
H Hotwiret 51xx , 52xx, and 54xx Remote Termination Units (RTUs)
H 71xx and 76xx Data Service Units (DSUs)
H Hotwire 7974, 7975, and 7976 Multirate Symmetric Digital Subscriber Line
(M/SDSL) Standalone Units
H Hotwire 7984, 7985, and 7986 Multirate High-bit-rate Digital Subscriber Line
(M/HDSL) Standalone Units
H Hotwire 8100 and 8200 Series (trap and icon support only)
H Hotwire 8310 and 8312 Multiple Virtual Lines (MVLt) Card
H Hotwire 8510, 8540, and 8546 Rate Adaptive Digital Subscriber Line
(RADSL) Cards
H Hotwire 8600, 8610, 8800, and 8810 Digital Subscriber Line Access
Multiplexers (DSLAM)
H Hotwire 8774, 8775, and 8776 Multirate Symmetric Digital Subscriber Line
(M/SDSL) Cards
H Hotwire 8784 and 8786 Multirate High-bit-rate Digital Subscriber Line
(M/HDSL) Standalone Units
H FrameSavert 9028 Frame Relay Compression Unit (FRCU)
H FrameSaver 9120 and 9620 Frame Relay Access Units (FRAU)
H FrameSaver Service Level Verifier (SLV) 9124, 9126, 9128, 9624,
9820, and 9820-C
H 9162, 9165, 9262, and 9265 T1 Access Multiplexer