User`s guide

Configuring Devices and Device Interfaces
4-12
7800-A2-GB26-80
May 1999
4. Log into the Telnet dialog as either Superuser or Manager. You are then
prompted to enter your password in a Telnet dialog similar to the following.
5. Enter the name of file in the Configuration Data File text input file in the
Upload/Download dialog where the image is to be stored.
6. Select Upload from the Upload/Download dialog.
7. Click on the Apply button in the Upload/Download dialog.
The gauge in the Upload/Download dialog displays the progress of the
transfer as a percentage of the job that is complete. A message appears
when the transfer is complete.
The amount of time required to upload a configuration image from a device to
a file varies depending on your network configuration and transmission
speed.
8. Click on Close to exit the Upload/Download dialog.
9. Click on the Telnet dialog. If the transfer was successful, the following
message appears:
Transfer is successful. Press any key to continue.
10. Press Return and type l to exit the Telnet session.