User`s guide

Configuring Devices and Device Interfaces
4-10
7800-A2-GB26-80
May 1999
Copy Configuration
You can create a duplicate or modified image of a device configuration and store
it within the configuration area of the device itself. This is useful if you want to
restore an image or if you want to have multiple configurations available.
" Procedure
To create a copy of a configuration image:
1. Select a device of which you want multiple configuration images.
2. Click on the OpenView Configuration menu and select DCE Manager. The
DCE Manager submenu appears.
3. Select Copy Configuration from the submenu. A Copy Device Configuration
dialog similar to the following appears.
4. Select the configuration you want to duplicate from the Copy From display
area.
You have the option of copying the Active image, the Factory default image,
or customized images stored in Customer 1 or Customer 2.
5. Select a destination for the image from the Copy To display area.
If you copy an image to the Active image, you can cause the IP address
within the device to be set to NULL. If this occurs, the address of the device
must be reset from the front panel of the physical device.
6. Click on the Apply button.