User`s guide

Configuring Devices and Device Interfaces
4-5
7800-A2-GB26-80
May 1999
Setting or Changing Configuration Parameters on a Device Interface
To display and set configuration parameters for a device interface, use the Device
Configuration dialog. Minimally, this dialog provides a description of the device
interface, interface type, and speed of the interface in bits per second.
Depending on the type of device interface you are viewing, many other fields may
be displayed such as bandwidth, datagram size, clock source, connect present,
port type, and so on. You can modify some of these fields.
" Procedure
To set parameters for a device interface:
1. Open a Device Display.
2. Select a device interface from the Device Display.
3. Click on the Device Display Configuration menu and select Options . A Device
Configuration dialog similar to the following appears.
4. Enter or select parameters as appropriate.
5. Click on Apply to set the parameters and close the dialog.