User`s guide

Configuring Devices and Device Interfaces
4-4
7800-A2-GB26-80
May 1999
Setting or Changing Configuration Options
You can display configuration options for most devices, device interfaces, and
DLCIs. With the exception of DLCIs, you can also set certain configuration
options. The following sections discuss how to:
H Display and set configuration options on a device
H Display and set configuration options a device interface
H Display configuration options for FrameSaver devices
Displaying and Setting Configuration Options on a Device
Configuration options provide a description of a device and the options displayed
depends on the device. At a minimum, however, you can change the following:
H Contact person for the device
H Logical name attached to the device
H Physical location of the device
" Procedure
To set parameters for a device:
1. Open a Device Display.
2. Click on the Device Display Configuration menu and select Options . A Device
Configuration dialog similar to the following appears.
3. Fill in fields as appropriate.
4. Click on the Redundant Power Source Failure Alarm button to enable
(default) or disable this feature.
5. Click on Apply to set the parameters and close the dialog.