User`s guide

Administering Devices
3-4
7800-A2-GB26-80
May 1999
Opening a Submap
An OpenView submap presents a view of your network. You can open the
submap that is associated with the device you are viewing.
" Procedure
To display the submap associated with a device:
1. Open a Device Display window.
2. Click on the Administer menu and select Show Submap.
Resetting Devices and Cards
Resetting a device or card performs a warm start of that device or card remotely.
The following procedures describe how to reset a device or card.
" Procedure
To reset a device:
1. Open a Device Display window.
2. Click on the Administer menu and select Reset Device.
A message dialog is opened and you must specify whether or not you want to
continue the operation as service to the device is interrupted during a reset.
" Procedure
To reset a MCC or DSL card:
1. Open a Device Display for a DSLAM chassis.
2. Click on a MCC or DSL card within the Device Display.
3. Click on the Administer menu and select Reset Card.
This option is also available from the pop-up menu. To access the pop-up
menu, position the mouse over a card and press the right mouse button.
A message dialog is opened and you must specify whether or not you want to
continue the operation as service to the card is interrupted during a reset.