User`s guide

Using the DCE Manager

2-16

7800-A2-GB26-80

May 1999

" Procedure

To launch a Device Display of an endpoint from an OpenView submap:

1. Open the Device Display for the DSLAM chassis.

2. Click on the Administer menu and select Show Submap. An OpenView

submap that lists the available endpoints appears.

3. Double-click on endpoint icon to open the Device Display.

A Device Display is available for the 5446 and 79

endpoints only. For other

endpoints, you can obtain information about the endpoints using the identity

option.

Managing the IP Conservative DSLAM

When a DSLAM is configured in IP Conservative mode, the chassis, cards, and

endpoints all appear to have the same IP address. The cards and endpoints are

addressed through a distinct community string.

NMS can manage the cards and endpoints when the community string does not

contain either of the following special characters: ~ and @

Any community string in the network must also refrain from using these special

characters.