User`s guide

Using the DCE Manager
2-8
7800-A2-GB26-80
May 1999
Table 2-3. Device Display Menus (2 of 2)
Menu DescriptionMenu Item
Diagnose
Identity Displays information about the selected device,
such as device type, model, release number,
version number, device uptime, etc.
Status Displays operational and administrative status on a
device. Some of the fields can be modified.
DLCI Status Displays details about DLCIs, such as the
operational and administrative status, tests results,
and Frames Dropped by Outbound Enforcement.
SLV Status Displays details about DLCIs, such as Frames and
Octets Dropped by the network, Latency Width,
Latency Period, etc.
VP/VC Status Displays details about the status of DLCIs
associated with a virtual path and channel.
VP/VC SLV
Status
Displays details about Latency Width, Latency
Status, Average Latency, Packet Size, etc.
Tests Starts loopback and pattern tests for the interface
you selected.
PVC Tests Starts loopback and pattern tests for the specified
DLCI.
Lamp Test Start Causes the lights to blink on the front panel of a
supported device. This option is useful when you
are attempting to locate a single device with a
setup of many devices.
Lamp Test Stop Causes the lights on the front panel of a supported
device not to blink.
Help On Context Opens a window and displays context-sensitive
help.
Device Display Pop-up Menus
Within a Device Display, pop-up menus provide shortcuts to certain operations
that can be performed on a device interface. Any item contained in a pop-up
menu is available from the Device Display menus also.
See
Performing an Operation on a Device Interface
on page 2-12, which
describes how to access the pop-up menus.