User`s guide

Using the DCE Manager
2-7
7800-A2-GB26-80
May 1999
Components Available from the Device Display Menus
The DCE Manager Device Display menus contain options which you can use to
perform various operations on devices and device interfaces. Likewise, the
Device Display toolbar and pop-up menus (as described in the following sections)
provide a shortcut to some of these menu items. Depending on the device or
interface you are viewing, some options are not available. Table 2-3 lists and
describes the Device Display menus.
Table 2-3. Device Display Menus (1 of 2)
Menu
Menu Item Description
File Exit Closes the Device Display window.
Administer
Demand Poll Causes a device to be polled for operational and
administrative status, regardless of the polling
interval.
Device Sync Updates configuration information for a device.
Manage Specifies that a device interface is in a state where
it can be polled, updated, and so forth.
Unmanage Specifies that a device interface cannot be polled
or updated.
Show Submap Opens the OpenView submap associated with the
device from within the Device Display.
Reset Device Performs a warm start of a device remotely.
Reset Card Performs a warm start of a card remotely.
Set Polling
Interval
Specifies how frequently the DCE Manager queries
a device for status information.
Configuration
Options Displays parameters associated with a device and
can be used to modify certain parameters for a
device.
Connect Opens a terminal window, which you can use to
gain direct access to a device’s craft interface.
Copy Creates duplicate or modified images of a device
configuration and stores it within the configuration
area of the device itself.
Upload/Download Saves and restores device configuration images.
DLCI Options Displays parameters associated with DLCIs.
VP/VC Options Displays parameters associated with the virtual
paths and channels aligned with DLCIs on an ATM
interface.
Remote Device
Display
Opens a Device Display for 5446 RTUs configured
behind 8546 DSL interfaces and 79 xx endpoints
configured behind 87
xx M/HDSL and M/SDSL
interfaces.
Remote Device
Identity
Displays information about the endpoints
configured on each DSL interface.