User`s guide

Using the DCE Manager
2-2
7800-A2-GB26-80
May 1999
Each device in a submap is presented as a device icon. Device icons display the
model number, device type, and the device selection name as shown in the
following table.
The color of each device icon presented in a submap represents the status of
that device as described in Chapter 5,
Monitoring Devices.
Icon Device
Standalone DCE device
IP-addressable carrier card device
Multi-slot device
Discovering Endpoints
The Hotwire 5446 RTU, which interoperates with the 8546 RADSL card, does not
appear on the OpenView submaps by default. However, it is discovered by the
DCE Manager and placed on a separate submap behind the icon that represents
the DSLAM chassis. You can launch a Device Display for the 5446 RTU from the
Device Display of a DSLAM chassis or from the submap. Using the Device
Display for the 5446 RTU, you can perform a variety of DCE Manager functions.
The Hotwire 79
xx M/HSDL and M/SDSL endpoints interoperate with 87 xx
M/HSDL and M/SDSL cards. You can launch a Device Display for the 79 xx
endpoints from the Device Display of a DSLAM chassis or from a submap.
All other endpoints are discovered by the DCE Manager and proxied on each
DSL card. While you cannot launch a Device Display for these endpoints, you
can obtain the identity of the endpoint from the Device Display for the DSLAM
card.
See
Managing Devices Behind the DSLAM Chassis on page 2-14 and Obtaining
the Identity of Devices and Interfaces in Chapter 5, Monitoring Devices , for more
information.