User`s guide

Setting Up the DCE Manager
1-15
7800-A2-GB26-80
May 1999
NMS System Setup for the DCE Manager
In most instances, an NMS workstation is connected to a router. With this setup,
the NMS can easily access devices on other subnets. However, if the NMS is not
attached to a router (such as a hub), you must create explicit routes to the other
subnets. To do this, use the route command from the command line to
manipulate the NMS routing table manually. See the route manpage for
command line arguments.
Starting the DCE Manager
The DCE Manager is integrated with OpenView or NetView during the installation
process and is available as a menu item on the Configuration and Fault menus.
Selecting the DCE Manager menu item opens a submenu of its functions.
The remaining chapters in this manual describe how to use the DCE Manager
with the OpenView user interface. Although the OpenView and NetView interface
differ somewhat, the function of the DCE Manager is the same.