User`s guide

Setting Up the DCE Manager
1-13
7800-A2-GB26-80
May 1999
Determining the Version of the DCE Manager
If you need to determine the version of the DCE Manager that is installed on your
system, type the following at the system prompt:
H For HP-UX and Solaris systems:
/opt/OV/bin/attGEMRel
H For AIX systems:
/usr/OV/bin/attGEMRel
Viewing Management Information Base (MIBs) Files
The DCE Manager uses internal copies of MIB files to manage devices and
device interfaces.
" Procedure
To browse the MIB files using either OpenView or NetView:
1. Click on the Options menu and select Load/Unload MIBs SNMP . This opens
a dialog box that you can use to manage the MIBs.
2. Click on the Misc menu and select SNMP MIB Browser. This opens a dialog
box that you can use to view the MIB files.
Performing an Upgrade
Occasionally, you may have to upgrade the DCE Manager software. While
information is not typically lost or corrupted during an upgrade, it is recommended
that you back up your system before performing the upgrade process.
To perform the upgrade, you must have the product serial number and the
software license key used to install your system.