User`s guide

Setting Up the DCE Manager
1-12
7800-A2-GB26-80
May 1999
10. Unmount the CD-ROM:
/etc/umount /tmp/cdrom
11. Exit from root.
12. Reboot your machine.
The DCE Manager is automatically integrated into the NetView application. When
you start the NetView application, the DCE Manager is available from the
Configuration or Fault menus.
Verifying the Installation
The following sections provide you with the information you need to verify the
installation of the DCE Manager software and the version of the DCE Manager
software installed.
Checking Installed Software
To ensure that the DCE Manager has been installed on your system properly,
enter the command line applicable to your system:
H For HP-UX and Solaris systems:
/opt/OV/bin/ovstatus
H For AIX systems:
/usr/OV/bin/ovstatus
If the DCE Manager is installed properly, the following processes are listed:
object manager name: attGEMlistener
state: RUNNING
PID: 1425
last message: Initialization complete.
exit status: –
object manager name: attGEMgtp
state: RUNNING
PID: 1432
last message: Initialization complete.
exit status: –
object manager name: attGEMparser
state: RUNNING
PID: 1433
last message: Initialization complete.
exit status: –