User`s guide

Setting Up the DCE Manager
1-11
7800-A2-GB26-80
May 1999
5. Specify whether or not you want to continue with the installation. The prompts
vary depending on whether or not the DCE Manager is currently installed on
your system.
— If the DCE Manager is currently installed on your system, the following
prompt appears:
Do you want to remove the existing product? (y/n)
Enter y to remove the installed version of the DCE Manager. After
removing the installed version, the installation process asks if you want to
install the DCE Manager. You must enter y to continue.
Enter n to stop the installation.
— If the DCE Manager is not installed on your system, the following prompt
appears:
Do you want to install OpenLane DCE Manager? (y/n)
Enter y to continue the installation.
Enter n to stop the installation.
6. Enter the product serial number:
Please enter the product serial number:
7. Enter the software license key. The prompts you receive vary depending on
whether or not you have a current license key.
— If you have a software license key, the following prompt appears:
Do you want to enter a new software key? (y/n)
Enter y to enter the software license key. You are then prompted as
follows:
Please enter your new software key:
Enter n if you want to enter the software license key at a later date. The
installation process continues, but you cannot use the DCE Manager
functions until the new software license key has been entered, unless
you have time remaining on your current key.
— If you have never entered a software license key, the following prompt
appears:
Please enter your software key:
The installation process specifies the number of days remaining the
software license key expires.
8. Check the smit.log file for your platform, which specifies any errors
encountered during the installation.
9. Change to the root directory:
cd /