User`s guide

Setting Up the DCE Manager
1-9
7800-A2-GB26-80
May 1999
8. Enter the software license key. The prompts you receive vary depending on
whether or not you have a current license key.
— If you have a software license key, the following prompt appears:
Do you want to enter a new software key? (y/n)
Enter y to enter the software license key. A new prompt appears.
Enter n if you want to enter the software license key at a later date. The
installation process continues, but you cannot use the DCE Manager
functions until the new software license key has been entered, unless
you have time remaining on your current license key.
— If you have never entered a software license key, the following prompt
appears:
Please enter your software key:
The installation process specifies the number of days remaining before
the software license key expires.
9. Check the log files for your platform if you receive error messages during the
installation process.
— For HP systems:
/var/adm/sw/swagent.log
/var/adm/sw/swconfig.log
— For Sun systems:
/tmp/update.log
/var/adm/sw/swagent.log
10. Change to the root directory:
cd /
11. Unmount the CD-ROM:
/etc/umount /tmp/cdrom
12. Restart the volume manager, if it was stopped (Solaris only):
vold &
13. Exit from root.
The DCE Manager is automatically integrated into the OpenView application.
When you start the OpenView application, the DCE Manager can be accessed
through the Configuration or Fault menus.